Spray

Mighty Fire Breaker™ lowers risk on mass timber with our value add Class A fire protection

Raising The Resilient Bar On The US Building Industry In Support Of Our Builders
are out to lead in defending builders and lumber from extreme wet weather that causes our great builders problems when lumber units and pre fab walls show up on job unwrapped reaching very high moisture content to start rot and mold before the lumber even gets in the builders buildings. Our lumber is dried and wrapped and always shows up at 19% of less to meet the Cal Green Code.

We are selling Good, Better, Best where our Good is dry and wrapped and our Better has Mold Protection and our Best has Mold and Class A fire protection.

Technical Evaluation Report
Mighty Fire Breaker™
TER 1703-18
MFRT™ Class-A Fire Protected Lumber
M-Fire Holdings LLC

Product:
Lumber treated with MFB-31 Citrotech to create MFRT™ Class-A Fire Protected Lumber

Issue Date: September 25, 2017
Revision Date: October 22, 2021
Subject to Renewal: October 1, 2022
TER 1703-18

DIVISION: 06 00 00 - WOOD, PLASTICS AND COMPOSITES
SECTION: 06 05 83 - Shop-Applied Wood Coating
SECTION: 06 11 00 - Wood Framing
SECTION: 06 17 00 - Shop-Fabricated Structural Wood
1 Product Evaluated
1.1 Lumber treated with MFB-31 Citrotech to create MFRT™ Class-A Fire Protected Lumber
1.1.1 MFB-31 Citrotech is intended as a treatment for solid sawn lumber in limited interior, dry use conditions (Section3.1.7). It is a fire retardant coating and is used as an alternative to Fire Retardant Treated Wood (FRTW). A Polymere can be added with our MFB40 fungicide VOC free to add weather, mold and fungal defense

CONTACT US FOR A FREE QUOTE
1-909-519-5470
Or Write to us
info@mightyfirebreaker.com